Industrial inputs MaNima Ignis
Industrial inputs can be activated with an output voltage from a PLC, sensor, digital and analog outputs etc. The industrial inputs on the MaNima Ignis are both analog and digital inputs.
Digital inputs can be activated with an output voltage between 0-48V or with a current of 4-20mA. These inputs have two states: on and off. There are a total of 5 digital inputs available on the MaNima Ignis. This makes it possible to connect a maximum of 5 digital outputs to one interface
Analog inputs can be activated with a voltage between 0-10V or with a current of 4-20mA. These inputs can measure the value of a voltage (or current). This means that the input can measure, for example, 4 or 8 volts. These voltages can be given a value such as 4V = 40% and 8V = 80%. This is useful for applications such as heat sensors and dimming. There are 6 analog inputs on the MaNima Ignis.
The inputs can be configured in the MaNima Configurator. They can be used to trigger specific scenes or segments and they can control the dimming value of the MaNima interface. When the inputs are configured, the MaNima Ignis will operate autonomously.