LuxaLight Long Life LED-strip WS2812B Digital RGB High Power Waterproof (5 Volt, 60 LEDs, 5050, IP68)
LS5RGB60WS2812BWLX
Technical specifications
General
Brand
LuxaLight
LEDs / meter
60
LED type
SK6812
WS2812
Length per reel
10 m
Length per segment
16.67 mm
LED strip width
12.00 mm
LED strip thickness
5.00 mm
Mantle material
Silicon
Lifetime
50000 hours
Lighting
Luminous Flux
675 lm
Luminous flux red
200 lm
Luminous flux green
290 lm
Luminous flux blue
185 lm
Wave length Red
620~630 nm
Wave length Green
510~525 nm
Wave length Blue
455~470 nm
Beam angle
120 °
LB waarde
L80B50
Electronics
Current / meter
3.60 A / meter
Power consumption per meter
18.00 W / meter
Environmental
IP class
IP 68
Directives / warranty
Warranty
2 years
Directives
RoHS 2002/95/EC Compliant
Services and specializations
Product description
LuxaLight Long Life LED-strip WS2812B (SK6812) Digital RGB High Power Waterproof distinguishes itself by the A-quality 5050 LED-chip that ensures an extra high light output. These LED-strips are fitted with the special WS2812B (SK6812) LEDs with an embedded controller chip that allows each LED to control color and brightness separately.
This does not require complex wiring plan, these LEDs are serially controlled by a specially designed microcontroller. With only three wires the strip can be controlled: Ground, +5 V (note the current!) And a serial data signal. This digital LED-strip is ideal to control with MaNima interfaces.
On the strip itself, between the LEDs this serial information is transferred from the serial output of one LED to the serial input of the next LED. It is thus possible for any length LED-strip colors to come true at the beginning and end of each other, or even to create a display that can display (moving) images.
Both RGB LED chips and the microcontroller are integrated in the housing SMD 5050, and together form a complete digital controllable full-color pixel. The LED has a built-in signal conditioning circuit to transfer the digital signal distortion free to the next LED input.
Built-in reset circuit and power lost reset circuit. Built-in electric reset circuit and power lost reset circuit. Each pixel of the three primary color can achieve 256 brightness levels (16.7 million color) full color display, and scan frequency not less than 400Hz/s.
Cascading port transmission signal by single line.
The LED used here is the WS2812B (SK6812), so 4-pin SMD 5050 package, extra high light output.
When the refresh rate is 30fps, low speed model cascade number are not less than 512 points, high speed mode not less tha1024 points. Send data at speeds of 800Kbps. The color of the light were highly consistent.
Cost-effective applications.
Applications are for LED decorative lighting and indoor/outdoor LED video screen.